ALTRACO VERNIER CALIPER Manual de usuario

OPERATION INSTRUCTIONS ALTRACO, INC. OPERATION INSTRUCTIONS TABLE OF CONTENTS PAGES 1 – 2 DIAL CALIPER 0-6” PAGES 3 – 4 ELECTRONIC DIG

again if necessary, the relative zero point is not changed until ‘ON-ZERO’ is pressed to set a new relative zero point. - ‘ON ZERO’ is to tu

ELECTRONIC DIGITAL MICROMETER 1. Keys Page 10

2. Specification: - Resolution: 0.001mm / 0.00005” - Accuracy: 0.003mm / 0.00012” - Repeatability: 0.001mm / 0.00005” - M

OUTSIDE MICROMETER 1. Clean the micrometer gently before use. Make sure the measuring faces are clean. 2. Remove

be the same as the length of standard rod when the micrometer ‘measures’ the rod. For example, when 5607 (25-50mm) ‘measures’ its standard rod

Never rotate the thimble to let the spindle contact with the workpeice, which may damage the precision thread inside the sleeve. Please grip th

DIAL INDICATOR 1. Clean the measuring tip gently before use. Remove cutting chips, dust, burrs and other foreign

Example: The small pointer is between ‘.1’ and ‘.2’ or between ‘.6’ and ‘.7’=0.1” or 0.6” The large pointer is close to line ‘21’ of black digi

6 PC TELESCOPING GAGE SET 1. The measuring range of each piece is: A: 8 - 12.7mm (5/16” – 1/2") B. 12.7 – 19mm (1/2

4. Measurement: Page 18

DIAL CALIPER 0 – 6” 1. Clean measuring faces before use. 2. Remove cutting chips, dust, burrs and other foreign substances

MAGNETIC BASE 1. Fix all dial indicators with 8mm diameter shank and lug back with 6.3mm or 1/4" diameter mounting

2. Attach on flat surface horizontally or vertically, as well as on cylindrical surface. 3. Permanent pulling magnet is 60 KGS. Switch is used to

6. Always apply constant force on thumb wheel during measurement and zero setting. 7. Tighten locking scre

ELECTRONIC DIGITAL CALIPER 1. Clean measuring faces before use. 2. Remove cutting chips, dust, burrs and other foreign

5. Measurement: 6. One battery will last for one year of continuous use. If there is nothing on the display or the digits flas

VERNIER CALIPER PRECAUTION: 1. Clean the caliper before use. Make sure the measuring faces are clean. 2. Remove

1. How to read Example 1 A: 32 B: 0.54 ---------- C: 32.54mm Example 2 A: 2.05 (2” + 2 X 1/40”) B: 0.012 ------------ C: 2.062” A is th

measuring faces be in good contact with the workpiece, meanwhile the clamping screw must be loose. 5. Precaution for measurement: It is import

ELECTRONIC DISC BRAKE CALIPER repair part number: DRG6059-2 RS232 computer interface cable (optional) DRG6059-3 fitted ca